FILM HOOK SPONGE BOTTLE HOLDER SUS

Spec/Size

Product Code	250898828600
Color	SILVER
Size	W21 x D8.5 x H6cm
Materials	STAINLESS STTEL,POLYCARBONATE,PVC,POLYURETHANE
Weight	0.17kg
Warranty	-
Assembly Type	Assembled
Assembly Time	-
Delivery Type	DropOffDelivery
Package Size	W6 x D8.6 x H25cm
Package Weight	0.17kg
Made In	CHINA

●The dividers can be moved freely
●The adhesive sheet can be repeatedly attached and removed

[Size (approx.)]
21 x 8.5 x 6 cm

[Material]
Body: Stainless steel
Adhesive sheet, hook: Polycarbonate
Sheet: PVC resin, polyurethane

[Load capacity (approx.)]
2 kg

[Heat resistance temperature]
60 ° C

[How to install]
* Before use, please check that the adhesive sheet is not deformed or folded.
1. Wipe off dirt, moisture, oil, etc. from the mounting surface and dry it.
2. Peel off the protective sheet attached to the adhesive surface of the adhesive sheet.
3. Press the adhesive sheet firmly and rub from the center to the outside to make it adhere while removing air.
4. Insert the main body into the hook from above. After attaching the adhesive sheet, wait at least 30 minutes before placing the storage items.

[Orientation of installation]
Look at the product from the side and install it with the protruding side facing the wall.

[About installation locations]
Places where it can be installed:
● Surfaces larger than the adhesive surface of this product
● Flat, shiny surfaces without unevenness (stainless steel, tiles, plastic surfaces, glass, metal painted surfaces such as refrigerators and washing machines, etc.)
* Avoid using on thin glass surfaces.
* Even if the surface is flat, it may not be possible to install depending on the surface treatment, material, condition, and environment. Places where it cannot be installed:
● Surfaces smaller than the adhesive surface of this product
● Uneven, rough, curved, or non-perpendicular surfaces
● Wallpaper and other cloth surfaces
● Surfaces with fluorine treatment, mold prevention, stain prevention, etc.
● Earthen walls, plaster, sand walls, mortar, concrete, frosted glass, natural marble
● Near fire or places that become hot

[Care instructions and precautions]
● If the adhesive power of the adhesive sheet decreases, gently wash the adhesive surface with a diluted solution of neutral detergent, rinse with water, and let it dry naturally to restore the adhesive power.
● Please note that if you roughly peel off the adhesive sheet or use excessive force, the sheet may deform and become unable to be used repeatedly.
●Do not boil either the suction sheet or the main unit. Also, do not use a dishwasher.
●Do not use paint thinner, benzine, polishing powder, detergents containing abrasives, scrubbers (nylon, metal, etc.), melamine sponges, or sponges containing abrasives.
●Do not use bleach.

[Handling Precautions]
●Do not use for purposes other than its intended use.
●Use on a flat surface.
●Make sure that the product is firmly attached before use.
●Store in a balanced manner so that the load is not unevenly distributed.
●Use within the load capacity range.
●Please note that even if the product is within the load capacity range, a large impact may cause the product to fall, resulting in injury or damage.
●The load capacity is a guideline. It depends on the material of the surface on which it is installed and the conditions of use.
●Do not use near fire, in places where it becomes hot, or in direct sunlight.
●If it is installed in the same place for a long period of time, the surface on which it is installed may discolor. Remove it regularly.
●When using, be careful not to injure yourself on the metal joints, etc.